Skip to content

Architecture Glossary

Hammam

Plan sketch of a hammam: domed cold hall, warm room, hot room with corner cells and navel stone, cistern and furnacecold hallwarm roomhot roomnavel stonefurnace
Sketch: Hammam · original hand drawing, mimari3d

A hammam, hamam in Turkish, is a building type for bathing with hot water and steam, with its rooms arranged in order of temperature. Bathers move from the cool part toward the hot part, and the plan follows that sequence. Thick masonry walls, domes and vaults form a shell that holds heat and withstands moisture.

Plan and parts

  • Cool room (soğukluk or camekân): the changing and resting hall, often under a large dome or a timber roof.
  • Warm room (ılıklık): the transition between cool and hot, usually with the toilets.
  • Hot room (sıcaklık): the main bathing space, with a heated central platform, the göbek taşı, and iwans around it.
  • Private cubicles (halvet): small bathing rooms opening off the hot room.
  • Water tank and furnace (külhan): the service zone where water is heated.

Heating and construction

Hot gases from the furnace pass through the cavity under the hot room floor, called the cehennemlik, and rise through flues set in the walls. Floors and walls warm up in turn. Small glass-capped openings in the domes, known as fil gözü, bring light from above. In wet areas horasan mortar and plaster are used for their resistance to water.

Hammams in surveys and restoration

Moisture, salts and long cycles of heating and cooling leave heavy damage on walls and plaster. Surveys investigate the underfloor cavity and the flues through test openings, and the original heating system is a central question of restitution. When a hammam is adapted for a new use, keeping that system legible matters.

Message us on WhatsApp